![]() Found this on a forum for the Honda Goldwing 1800 and a few other bikes. If you do decide to give it a go please let me know what you think. Also seems to sound better.ġ.Completely disconnected the battery for 24h (my reading sources state 10 minutes to half an hour) I wanted to me sure.Ģ.Turn the key to on to get rid of any held power for about 30 seconds (probable not needed).ģ.Reconnect Battery (make sure all other electrics are off)ĥ.Start bike without touching the throttle.Ħ.Leave to idle (DO NOT TOUCH THE THROTTLE) for around 15 minutes until the fan kicks in (mine took 16 minutes). Sent a 20 ECU for reflash over the holidays, 10 off if flashed and returned by 12/31 or so. ![]() Smoother throttle response, pulls from much lower in the rev band in all gears and 6th is much more usable. Rarely, if ever, have I been this satisfied with a vendors product. In the 15 minutes the ECU creates a base map using all the info gathered from the O2, water temperature and possibly other sensors. Excerpts and links may be used, provided that full and clear credit is given to Woolich Racing and with appropriate and specific direction to the original content.Apparently as part of the prep before the dealer hands over the keys, the mechanic resets the ECU starts the bike and lets it idle for around 15 minutes until the fan cuts in. Unauthorized use or duplication of any of the material on this website without express and written permission from this website’s author and owner is strictly prohibited. Woolich Racing Products are Intended for RACE USE on CLOSED CIRCUIT ONLY User Guides and Installation InstructionsĮlectronic Mapping - Plug and Play Performance Note: The Hacker/Tweaker is a bare PCB board, you will need to make your own case. It powers up right from the Zt-3 DATA port. There are two mounting holes for screws or standoffs. Like all LED displays it requires a tinted foil or Lexan cover. Designed to fit into tight spots, full board dimensions are less than 2" by 1". The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-3 Wideband Systems.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |